3 Maintenance
80
Maintenance
3
Cleaning the Document Cover and Document Glass
If the document cover and document glass are dirty, streaks or smears may appear on
copies, faxes, or scanned documents and the machine may not properly detect document
sizes.
To ensure clean copies at all times, clean the
document cover and the document glass about
once a month with the cloth provided in the
document feeder as shown in the illustration.
Important •Do not use benzene, paint thinner, or other
organic solvents. Doing so might damage
paint or coating on plastic parts.
• Cleaning the machine with an excessive
amount of water may cause the machine to
malfunction or damage documents during
copying, faxing, or scanning.
1
Wipe the document cover with the provided
cloth.
Important •Do not use cleaning agents other than water
or neutral detergent.
Note • If you cannot remove dirt easily, gently wipe
the document cover with a soft cloth
moistened with a small amount of neutral
detergent.
2
Wipe the document glass with the provided cloth.
Important •Do not use cleaning agents other than water or neutral detergent.
Note • If you cannot remove dirt easily, gently wipe the document glass with a soft cloth moistened with a
small amount of neutral detergent.
Document
cover
Document
glass
To Next Page
Loading...
Need help?
General
