Fuji Xerox DocuCentre-V 5070 User Manual

2 Paper and Other Media
50
Paper and Other Media
2
1 Pull out the tray until it stops.
Important •While the machine is processing a job, do not
pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the tray,
and then load the new stack of paper.
• Do not pull out all the trays at the same time.
Otherwise, the machine gets inclined and
turns over, which may cause injuries.
2 Load and align the edges of the paper against
the left edge of the tray, with the side to be
copied or printed on facing up.
Important •Do not load paper above the maximum fill
line. It might cause paper jams or machine
malfunctions.
• Do not place any paper or objects in the
empty space on the right side of Trays 1 to 4.
It may cause paper jams or machine
malfunction.
3 Push the tray in gently until it stops.
Important •When pushing the paper tray in, do it slowly. If the tray is pushed with too much force, it might cause
machine malfunctions.
Loading Paper in Tray 3 (Tandem Tray Module) (Optional)
The following describes the procedure for loading paper in Tray 3 (Tandem Tray Module).
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the displayed instructions. Copying or printing
automatically resumes when paper is added.
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and
reduces paper jams.
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 3 (Tandem Tray
Module) (Optional)" (P.55).
1 Pull out the tray until it stops.
Important •While the machine is processing a job, do not
pull out the tray that the job uses.
• Do not add a new stack of paper on top of
the remaining paper in the tray to prevent
paper jams or any other troubles. First,
remove the remaining paper from the tray,
and then load the new stack of paper.

Fuji Xerox DocuCentre-V 5070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V 5070
Category	All in One Printer
Language	English