Fuji Xerox DocuCentre-V 5070 User Manual

15 Problem Solving
422
Problem Solving
15
The entire output
is faint.
When Tray 5 is used, the size
and type of the loaded paper
are different from the
settings on the print driver.
Load paper of the correct type and size into
Tray 5.
Refer to "Loading Paper in Tray 5 (Bypass)" (P.51).
Two or more sheets may be
fed simultaneously.
Fan the paper well and load it again.
Refer to "Loading Paper" (P.49).
Paper becomes
wrinkled.
The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.49).
Paper has been added to the
paper loaded.
The paper is damp.
Text is blurred. The paper is unsuitable. Replace the paper with new one.
Refer to "Loading Paper" (P.49).
Paper has been added to the
paper loaded.
The paper is damp.
White patches
appear vertically.
Paper feed
direction
The drum cartridge has
deteriorated or is damaged.
Replace the drum cartridge with a new one.
Refer to "Replacing Drum Cartridges (for Customers
Having a Spot Maintenance Contract)" (P.66).
No toner remains in the toner
cartridge.
Replace the toner cartridge with a new one.
Refer to "Replacing Toner Cartridges" (P.63).
Symptom Cause Remedy

Fuji Xerox DocuCentre-V 5070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V 5070
Category	All in One Printer
Language	English