15 Problem Solving
514
Problem Solving
15
027-500
[Cause] Unable to connect to the SMTP server.
[Remedy] Specify the SMTP server name correctly or specify the server by using its IP address.
027-501
[Cause] A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-502
[Cause] Failed to log into the POP3 server when using the POP3 protocol.
[Remedy] Confirm whether the user name and password used in the POP3 server are correct on
CentreWare Internet Services.
027-503
[Cause] A POP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-504
[Cause] An SMTP server error occurred.
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
Support Center.
027-513
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because access
to the SMB server was not permitted.
[Remedy] Consult your system administrator for settings.
027-514
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because an
error has been occurred between the SMB server and the DNS server.
[Remedy] Check the following conditions:
z
The SMB server is connected to the DNS server.
z
The SMB server name is registered on the DNS server.
027-515
[Cause] The machine failed to transfer data using SMB of the Scan to PC service because an
error has been occurred.
[Remedy] Take the following measures:
z
Set the DNS server address.
z
Set the target SMB server address using IP address.
Error Code Cause and Remedy
To Next Page
Loading...
