16 Appendix
590
Appendix
16
îš„ Finisher-B1 (Optional)
Original Size Maximum: A3, 11 x 17"
Minimum: A5*
* : For non-standard size paper: 125 x 85 mm
Paper Weight 38 - 128 gsm (2-sided: 50 - 128 gsm)
Capacity 130 sheets
Important • When using 80 gsm paper
Feeding Speed <ApeosPort-V 5070, DocuCentre-V 5070>
55 pages/minute (A4 1-sided)
<ApeosPort-V 4070, DocuCentre-V 4070>
46 pages/minute (A4 1-sided)
Type Sorting (Offset available)/Stacking (Offset available)
Paper Size/Paper Weight
z
Paper Size
Maximum: A3, 11 x 17"
Minimum: B5
z
Paper Weight
60 - 216 gsm (56 - 216 gsm when the HCF Kit (optional) is installed.)
Paper Capacity
z
Without Stapling
A4: 2000 sheets; B4 or larger: 1000 sheets; Mixed Size Stacking*1 : 300
sheets
z
With Stapling
A4: 100 copies or 1000 sheets
*2
, B4 or larger: 75 copies or 750 sheets
With Booklet Finisher
*3
50 copies or 600 sheets
With Scoring
*3
500 sheets
Important • When using 80 gsm paper
*1 : When larger size sheets are stacked on top of smaller size sheets.
*2 : 75 sets or 750 sheets with dual stapling.
*3 : The Booklet Finishing function requires the Booklet Maker Unit for Finisher-B1. After a job
with the Booklet Finishing function specified has been output, the next job may not be
delivered until the sheets are removed from the output tray. Also, if larger size sheets are
stacked on top of smaller size sheets after a job with the Booklet Finishing function
specified has been run, the next job may not be delivered until the sheets are removed
from the output tray.
Staple
z
Capacity
50 sheets (90 gsm or less)
z
Paper Size
Maximum: A3, 11 x 17"
Minimum: B5
z
Position
Single stapling (Front/Angled, Back/Straight), Dual stapling (Parallel)
Punch
z
Number of Holes
2-hole / 4-hole punch or 2-hole / 3-hole punch (US Specifications)
z
Paper Size
A3, 11 × 17", B4, A4*, A4 , Letter*, Letter , B5
* : 3-hole punching is not supported for these paper sizes.
z
Paper Weight
60 to 200 gsm