Replacing Consumables
67
Maintenance
3
3
Pull the release handle of Cover A, and open
the Cover A.
4
Lift up the release lever of the drum cartridge,
and gently slide out the drum cartridge until
you can hold the handle on the top of the drum
cartridge.
5
Hold the handle on the top of the cartridge,
and pull it out from the machine.
Important • Be sure to hold the drum cartridge by its
handle when removing it out of the machine.
If you do not hold it by its handle, it might fall
out of the machine and soil the floor.
6
Open the box and take the new drum cartridge
out of the bag.
Important • Do not place the new drum cartridge in an
upright position.
• Return the old drum cartridges to our
Customer Support Center.
7
Place the drum cartridge on a flat surface, and
pull out the protective paper while holding the
tape that is attached to the protective paper.
Important • Be sure to pull out the protective paper
straight and horizontally. If it is pulled out
upward, it may be torn before it is completely
out of the cartridge.
• After the protective paper is removed, do not
shake the drum cartridge or handle it roughly.
To Next Page
Loading...
Need help?
General
