Replacing Consumables
69
Maintenance
3
1
Make sure that the machine is not operating,
and open the finisher front door.
2
With grasping the handle, pull the staple
cartridge holder to the right, towards you.
3
Pull the staple cartridge out of the finisher.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
4
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
To Next Page
Loading...
Need help?
General
