Printing Basics 97
For iOS
a Ta p Settings Wi-Fi.
b Tap the printer's SSID.
c Enter the passphrase, and then tap Join.
The mobile device will connect to the printer.
For Android™
The procedure varies depending on the mobile device you are using. Refer to the manual provided with your
mobile device.
11 Install the printer on the mobile device.
For Windows 8, Windows 8.1, Windows RT, and Windows RT 8.1
a Ta p Devices in the PC settings menu.
b Tap Add a device in the Devices sub-menu.
c Ta p DIRECT-XXXXX.
The printer is ready for use.
For Windows Vista and Windows 7
You need to install the print driver on the mobile device. For details, see "Configuring Printer and Installing
Software on Windows" on page 44.
For iOS
You need to install the printing application such as Print Utility for iOS, and then the printer is ready for use.
For Android
You need to install the printing application such as Fuji Xerox Print Utility for Android, and then the printer is
ready for use.
• Connecting a Mobile Device With WPS-PBC and WPS-PIN
The following is a typical procedure for connecting a mobile device to the printer using WPS-PBC or WPS-PIN. The
procedure varies depending on the mobile device you are using. Refer to the manual provided with your mobile
device.
1 From the mobile device, start the procedure to connect using the WPS-PBC or WPS-PIN.
The procedure varies depending on the mobile device you are using. Refer to the manual provided with your
mobile device.
2 Accept the invitation for Wi-Fi Direct connection displayed on the LCD panel of the printer.
Printing via Wi-Fi Direct
The printing procedure varies depending on the mobile device you are using. Refer to the manual provided with your
mobile device to print as you normally do from the device.
Disconnecting Wi-Fi Direct Network
1 Press the (Menu) button.
2 Select Admin Setting, and then press the button.
3 Select Network, and then press the button.
4 Select Wi-Fi Direct Setup, and then press the button.
5 Select Connection Status, and then press the button.
6 Press the button to select the device name.
To Next Page
Loading...
Need help?
General
