Fuji Xerox DocuPrint CP475 AP User Manual

Interface Cables
33
1 [Quick Setup]
You can install the basic software which you can use with the device all at once. The
following software can be installed:

PCL Driver

Print & Scan Hub
Reference

For how to install, refer to "Installing with [Quick Setup]" (P.33).
2 [Custom Installation] > [Driver]
You can select and install only the drivers that you need. The following drivers can be
installed:

PCL Driver

PS Driver

Common Print Driver
Reference

For how to install, refer to "Installing with [Custom Installation]" (P.34).
3 [Custom Installation] > [Software]
You can select and install only the software that you need. The following software can be
installed:

Print & Scan Hub

ContentsBridge Utility
Reference

For how to install, refer to "Installing with [Custom Installation]" (P.34).
4 [Support Tools] > [Create Driver Setup Disk]
You can create a setup disk for the drivers. Using the setup disk reduces the amount of work
required when installing drivers on multiple computers with the same settings.
Note

The setup disk cannot be used on a computer that has a different operating system than the computer that
the setup disk was created on. Create a separate setup disk for each of the operating systems.
5 [Media Information]
You can view the contents in the "Software/Product Manual" disc.
6 [Model-specific Manual]
You can display the User Guide (this manual).
Installing with [Quick Setup]
Note

Perform the following procedure in advance, and then start installing.

"Using the Ethernet Interface" (P.30)

"Using the USB Interface" (P.30)

"Connecting with Wireless LAN" (P.31)

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English