Fuji Xerox DocuPrint CP475 AP User Manual

13 Appendix
288
Position
adjustment
15
(Vertical
position
adjustment)
Adjusts the printing position vertically or horizontally, and changes the
positions of the margins.
[0](Default): Off
[1-500]: -250 to +250 mm
16
(Horizontal
position
adjustment)
Important

Data outside the printable area is not printed regardless of the adjustment of the
print position. In addition, data moved outside the printable area as a result of
adjusting the print position is not printed.
Escape sequence 62
(Escape
sequence)
A normal extended command is specified starting with hexadecimal 1BH ESC
as the escape sequence identifying the command, followed by ; (3BH). When
you cannot use a semicolon or ESC code with the host computer, you can use
a special string instead as an escape sequence. This setting specifies whether
or not to enable the escape sequence replacement feature. When enabling,
specify the escape sequence with item 63.
[0](Default): Disabled
[1]: Enabled
Reference

For more information on extended commands, contact our Customer Support Center.
63
(Escape
sequence
character)
To control an extended command with a text code, you must specify an
escape sequence (the first two bytes) of the extended command. Enter two
characters using the keyboard displayed on the screen.
[&%](Default): 0x21 - 0x7e
Form overlay 64 Constantly performs Form Overlay by selecting a form name (No. 01-64)
registered on the device.
[0](Default): Off
[1-64]: No. 1 - No. 64
Important

Since the default value is selected for this feature, this setting is not affected when
an extended commend is received.

Once a form name is selected, it continues to be displayed even if the form is
deleted.
Bypass Tray -Wait
User
67 Sets whether to suspend the print processing when feeding paper from the
bypass tray. Processing is resumed by a user operation on the device.
[0]: Off
[1](Default): On
Form Type 68 [0](Default): ESC/P-K
Binary character
strings
72 Sets the character strings to be specified when entering commands in
hexadecimal format.
[0](Default): OFF
[1]: &$%$
[2]: $?!#
0 Style 73 Sets the typeface for "0".
[0](Default): 0
[1]:
Number of sets 74 Sets the method of specifying the number of print sets.
[0]: Protocol
[1]: Panel
[2](Default): Command
Setting Item Item Number Value

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English