13 Appendix
306
Pen attributes 900-915 (Pen
intersects) (No.
0-No.15)
Set the process for when pens' lines intersect for 16 pens (No. 00 to 15).No.
00 denotes Item No. 900.
[0] (Default): None
[1]: Intersect
[2]: Round
[3]: Cut
[None]
[Intersect]
[Round]
[Cut]
[None] is suitable for drafts because it takes shortest processing time.
If a symbol is set by symbol command, the link process is not executed. The
symbol command is an HP-GL/2 command for specifying a symbol.
This item does not apply to characters.
950-965 (Pen
density) (No. 0-
No.15)
Sets the density of the 16 pens (No. 00 to 15). You can set the density from 0
to 250% in 1% increments. The default value is [0] for No. 0, and [100] for
the others. No. 00 denotes Item No. 950.
[0] - [255]: 0 to 250 (density)
Parameter Item No. Value
To Next Page
Loading...
