Fuji Xerox DocuPrint CP475 AP User Manual

WLAN Network Configuration
37
8 Connect to the Wi-Fi network using one of the following methods.
Note

You can check the settings configured for Wi-Fi feature in a Configuration Report.
*1 : The SSID of the wireless LAN access point and authentication information (such as WEP key and passphrase) are required.
For more information on the wireless LAN access point, ask your system administrator or network administrator.
*2 : The wireless LAN access point must support WPS. For information on the WPS operation on the wireless LAN access point,
refer to the manuals for the wireless LAN access point.
 Selecting WLAN Access Point from the List
1 Tap the SSID of the desired wireless LAN access point from the list displayed on the [Wi-Fi
Connection Settings] screen.
Note

If the wireless LAN access point does not set security, the setting is now complete.

Up to five wireless LAN access points are listed with the strongest access point first.
2 If the wireless LAN access point sets security, the authentication information screen
appears. Enter the required information and tap [OK].
Note

When you select an access point and the device has already been connected to another access point, the
screen to confirm whether to cancel the connection appears. Tap [Yes].
3 After you confirm the update, tap [OK].
The device reboots and the setting becomes effective.
 Connecting to WLAN Network Manually
1 Tap [Manual Settings] on the [Wi-Fi Connection Settings] screen.
2 Set required settings for your environment, and then tap [OK].
Method Settings Reference
From the list
*1
Select the desired SSID (name to identify the Wi-Fi
network) from the list of wireless LAN access points
and connect.
(P.37)
Manual connection
*1
If the desired SSID is not displayed in the list, specify
the SSID and connect to the Wi-Fi network.
(P.37)
Using WPS (push button)
*2
After sending a connection request from the device,
press the WPS button on your wireless LAN access
point within two minutes.
(P.38)
Using WPS (PIN code)
*2
Enter the PIN code displayed on the device to your
wireless LAN access point within two minutes.
(P.38)
Setting Items Description
SSID: Set the name to identify the Wi-Fi network. You can use up to
32 alphanumeric characters.
Communication Mode
Select either [Infrastructure] or [Ad-hoc]
*1
.
Encryption
Settings
No Encryption Does not set encryption.

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English