4 Print
88
Restriction on Private Charge Print (All)
Jobs cannot be interrupted while using this feature.
You cannot use this feature when an equipment other than the IC Card Reader
(optional) is connected to the device.
When the Authentication feature is not used, you cannot use this feature.
If you operate nothing while the error screen appears, the Auto Clear is conducted and
the device exits the authentication mode. In this case, the error job may be printed when
the next user authenticates if the screen after the Auto Clear is not set to [Home] and
[Locked] is not set for [Device Access].
When the authentication system for remote authentication is other than
"Authentication Agent", the service restriction is not applied. In this case, you can use
[Private Charge Print (All)] even if the use of printing is restricted.
To Next Page
Loading...
