viii
CAUTION
Machine Installation
WARNING
CAUTION
When cleaning this product, always switch off and unplug it. Access to a live machine interior
may cause electric shock.
Do not unplug or re-plug this product with the switch on. Plugging and unplugging a live
connector may deform the plug and generate heat, and eventually cause a fire accident.
Hold the plug not the cord when unplugging this product, or it may damage the cord and cause
electric shock or a fire accident.
For the DocuPrint M115 b, always switch off and unplug the machine when it is not used over
weekends or long holidays. It may cause deterioration of insulations and eventually electric
shock or a fire accident.
For the DocuPrint M115 f/M115 fs, switch off and unplug the product when it (i.e., fax function)
is not used over weekends or long holidays.
Please note that it cannot receive fax message during switch-off.
Once a month, switch off this product and check if
the power cord is plugged firmly into an electrical outlet;
the plug is not excessively heated, rusted or bent;
the plug and electrical outlet are free of dust; and
the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first and contact your
local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric shock or a fire
accident.
Never locate this product in the following places:
Near radiators or any other heat sources
Near volatile flammable materials such as curtains
In the hot, humid, dusty or poorly ventilated environment
In the place receiving direct sunlight
Near cookers or humidifiers
Locate this product on a level and sturdy surface that can withstand a weight of 8.1/8.4 Kg
(DocuPrint M115 f/M115 fs) / 7.1 Kg (DocuPrint M115 b). Otherwise, if tilted, the product may fall
over and cause injuries.
To Next Page
Loading...
