General information
11
1
2.Fax 1
5.LCD
Contrast
— Adjusts the contrast
of the LCD.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press c to make the
LCD darker, or press
d to make the LCD
lighter.
6.Scan Size — Adjusts the scan area
to the size of the
document.
A4*
Letter
7.Replace
Toner
— Sets the machine to
continue or stop
printing after the LCD
shows Replace
Toner.
Continue The machine will
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
29
Stop* The machine will stop
printing. Replace the
toner cartridge with a
new one.
2.Fax
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Setup
Receive
(In FAX mode
only)
1.Receive
Mode
You can choose the
receive mode that
best suits your
needs.
Fax Auto* Your machine
automatically
answers every call as
a fax. However, you
can answer the call
within the number of
rings. Fax Auto is
displayed on the LCD
when set.
37
Fax/Tel Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
The factory settings are shown in Bold with an asterisk.
1.General Setup (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
