Fuji Xerox DocuPrint M115 b - Printer; Machine Info

Chapter 1
26
3.Printer 1
4.Machine Info 1
4.ID Copy
(Continued)
4.2in1/1in1 2in1* Allows you to use the
2 in 1 (ID) Copy key
as a double- sided
copy.
46
1in1 Allows you to use the
2 in 1 (ID) Copy key
as a one-sided copy.
47
3.Printer
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Print
Options
1.Test Print Prints a test page. —
2.Auto
Continue
— If this setting is
enabled, the machine
will automatically
clear a paper size
error, and will use the
paper loaded in the
paper tray.
On*
Off Size mismatch is
displayed on the LCD
and printing does not
occur.
3.Reset
Printer
Restores the printer
settings to the
original factory
default settings.
a Reset
b Exit
The factory settings are shown in Bold with an asterisk.
4.Machine Info.
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Serial No. You can check the
serial number of your
machine.
2.Version 1.Main
Version
You can check the
firmware version of
your machine.
The factory settings are shown in Bold with an asterisk.
2.Copy (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.