EasyManua.ls Logo

Fuji Xerox DocuPrint M115 b - Ecology Features; Deep Sleep Mode; Auto Power off (Docuprint M115 B Only); Toner Settings

Fuji Xerox DocuPrint M115 b
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General information
29
1
Ecology features 1
Deep Sleep mode 1
If the machine does not receive any jobs for a
certain length of time, the machine will go into
Deep Sleep mode automatically and the LCD
will show Deep Sleep. The machine will
wake up when it receives a fax (DocuPrint
M115 f/M115 fs only) or a print job.
(For DocuPrint M115 fs only) Lifting the
handset will also wake up the machine from
Deep Sleep mode.
Auto Power Off (DocuPrint
M115 b only) 1
If the machine is in Deep Sleep mode for
several hours, it will then go into Power Off
mode automatically. Power Off mode is the
lowest power consumption mode, which
achieves a power consumption of
approximately 0.28 W. To disable the Power
Off mode, press and hold .
a Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b Press a or b to choose 2.Ecology.
Press OK.
c Press a or b to choose 2.Auto Power
Off.
Press OK.
d Press a or b to choose how many hours
before the machine goes into Power Off
mode. Choose 1 hour, 2 hours, 4
hours, 8 hours or Off.
Press OK.
e Press Stop/Exit.
Toner Settings 1
Toner Setting (Continue
mode) 1
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
a (For DocuPrint M115 f/M115 fs)
Press Menu, 1, 7 and go to step c.
(For DocuPrint M115 b)
Press Menu and then press a or b to
choose 1.General Setup.
Press OK.
b Press a or b to choose 4.Replace
Toner.
Press OK.
c Press a or b to choose Continue or
Stop.
Press OK.
d Press Stop/Exit.
NOTE
If you continue printing in the Continue
mode, the print may appear lighter.
After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).

Table of Contents

Related product manuals