Fuji Xerox DocuPrint M115 b User Manual

General information
13
1
1.Setup
Receive
(In FAX mode
only)
(Continued)
4.Auto
Reduction
The machine
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting.
(Menu, 1, 2, 2)
On* If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal or Folio
size paper.
Off
5.Memory
Receive
Automatically stores
any incoming faxes in
its memory if it runs
out of paper.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
On* Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.
Off Further incoming
faxes will not be
stored in memory.
The machine will
then stop
automatically
answering calls until
fresh paper is put in
the paper tray. To
print the last fax you
received, put fresh
paper in the tray and
press Start.
6.Print
Density
You can adjust the
Print Density setting
to make your printed
pages darker or
lighter.
-nnnno+
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Press c to make
darker, press d to
make lighter.
2.Fax (continued)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.

Fuji Xerox DocuPrint M115 b Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M115 b
Category	All in One Printer
Language	English