Basic Operation 55
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the Printer Settings page to confirm that the newly installed font ROM is detected by the printer.
a Press the (Menu) button.
b Select Report / List, and then press the button.
c Select PCL Fonts List, and then press the button.
The PCL Fonts List page is printed.
11 Confirm the TC/SC fonts, KR fonts, or JP fonts listed in the PCL Fonts List page.
If the TC/SC fonts, KR fonts, or JP fonts has not increased, turn off the printer, and re-install the font ROM.
To Next Page
Loading...
Need help?
General
