To Next Page
F
Frank MooreSep 1, 2025
Why does FujiFilm instax square Link charging stop during charging?
- JJanet WilkinsonSep 1, 2025
If charging stops during charging of your FujiFilm printer, charge the battery in a temperature range of +5°C to +40°C.
Why does FujiFilm instax square Link charging stop during charging?
If charging stops during charging of your FujiFilm printer, charge the battery in a temperature range of +5°C to +40°C.
Why FujiFilm Printer battery loses its charge quickly?
If your FujiFilm printer's battery is draining quickly, especially in a very cold environment, keep the printer warm before printing.
Why are FujiFilm Printer prints white?
If your FujiFilm prints are coming out white, it's likely because the film door was opened before all the film was used. Do not open the film door until all the film has been used up. Opening the film door with film remaining will expose the film, causing it to become white.
How to load film pack in FujiFilm instax square Link correctly?
To load the film pack correctly in your FujiFilm printer: - Use FUJIFILM instax SQUARE Instant Film, as other films are not compatible. - Align the yellow mark on the film pack with the yellow alignment marker on the printer body before loading.
Why FujiFilm instax square Link charging does not start?
If charging doesn't start on your FujiFilm printer, check that the USB power adapter plug is properly connected to the power outlet.
What to do if the FujiFilm Printer film does not print?
If the film doesn't print, it might be misaligned due to vibration or dropping. Try loading a new film pack. If the film is jammed, turn the printer off and then on again. If the problem continues, remove the jammed film and load a new one.
What to do if my FujiFilm Printer does not function normally?
If your FujiFilm printer isn't working correctly, it might have a temporary malfunction. Try pressing the reset button. Also, ensure the printer is adequately charged.
General| Duplex printing | No |
|---|---|
| Print technology | Thermal |
| Maximum resolution | 800 x 800 DPI |
| Borderless printing | - |
| Time to first page (color, normal) | 12 s |
| Color name | Midnight Green |
| Control type | Buttons |
| Product color | Green |
| Market positioning | Home & office |
| Maximum print size | 2.4\ |
| USB connector | USB Type-C |
| Direct printing | Yes |
| Power source | Battery |
| Charging time | 2 h |
| Power consumption (printing) | 3 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | CE, Federal Communications Commission (FCC), UKCA |
Weight and Dimensions| Depth | 37.5 mm |
|---|---|
| Width | 105 mm |
| Height | 127.5 mm |
Step-by-step instructions for correctly loading the instant film pack into the printer.
Step-by-step instructions for properly removing a used instant film pack from the printer.
Detailed steps for the initial connection between the printer and a smartphone via Bluetooth.
Process of detecting, connecting, and pairing the INSTAX SQUARE Link printer with a smartphone.
Steps to turn on the printer, start the app, and select an image to print.
How to initiate printing by tapping or swiping the image on the smartphone after selection.
