03-03
1-7. Cool Air Prevention
This setting is used to set the fan speed when the compressor stops once
the room temperature has reached the set temperature during heating operation.
Setting Description Function Number Setting Value
Super low
Follow the setting on
the remote controller
(corresponding to ventilation)
43
00
01
( Factory setting)
1-8. Room Temperature Control Switching
This setting is used to set the room temperature control method when the wired
remote controller is selected by the Indoor Room Temperature Sensor Switching Function.
Setting Description Function Number Setting Value
Control by the sensors of
both the indoor unit and the
wired remote controller.
Control only by the sensor of
the wired remote controller
48
00
01
( Factory setting)
www.ampair.co.uk | sales@ampair.co.uk
To Next Page
Loading...
Need help?
General
