4. Press the MODE button again to return to the clock display. The custom code will be
changed.
• If no buttons are pressed within 30 seconds after the custom code is displayed, the system re-
turns to the original clock display. In this case, start again from step 1.
• The air conditioner custom code is set to A prior to shipment.
• The remote controller resets to custom code A when the batteries in the remote controller are
replaced. If you use a custom code other than custom code A, reset the custom code after re-
placing the batteries. If you do not know the air conditioner custom code setting, try each of the
custom codes (
→ → → ) until you find the code which operates the air conditioner.
- 207 -
MULTI TYPE
5, 6 ROOMS TYPE
To Next Page
Loading...
