Getting started
Mounting the monito r base
2
1
3
► Insert the base plate at the foot (1 and 2).
► Secure the base plate with the screw (3).
► Place the monitor in the operating position.
Adjusting height
The height of the monitor can be adjusted by approximately 150 mm.
1
2
► Hold the monitor with both hands on
the right an d left edge of the casing
and move it up or down (1).
Adjusti
ng the inclination
The inclination of the monitor can be adjusted by - 3° (forwards) and +35°
(backwards) from its vertical position.
► Hold the monito r with both hands on the left and right sides of the case and move
it to the desired an gle (2, see "
Adjust ing hei ght", Page 14).
14 Fujitsu
To Next Page
Loading...
