Operation
Activate/deactivate ECO o perating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
The ECO mode can only be activated when the ACR and Auto Brightness are switched off.
► Press the
button to switch ECO operating mode on or off.
The message ECO Mode on o
r ECO Mode off is displayed.
If ECO mode is active, a brightness is used that is the optimum from both
the e rgono mic and ecological aspects.
If the brightness is further reduced by the user, this new setting is used during
the next call of the ECO operating mode.
After the ECO operating mode is switched off, the brigh tness previously set by the user is restored.
Selecting the input signal
INPUT
DVI-D
HDMI
DisplayPort
► Press th
e
button to open the INPUT setting window.
► Press the
/ button to select the desired monitor port.
► Press
the
buttontoconfirm the selected monitor port or to close
the wi
ndow without making any changes.
28 Fujitsu
To Next Page
Loading...
