Getting started
Connecting the device
Please observe the safety information in " Importa nt notes", P age 7.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and t
he computer.
► Disconnect th e power plug from the computer.
Connecting cables to the monitor
The s upplied data cable has two 20-pin DP connectors for c onne ction to
the monitor and to the computer.
Information on the compu ter connections and interfaces is contained in the
operating manual for the computer.
10
1
4 5 632 8
7
8
9
1 = Po wer connector
2 = DVI-D connector
3 = HDMI socket
4 = Display port socket
5 = AUDIO-IN socket
6 = AUDI O- OU T s oc ke t
7 = USB 3.1 G en1 (5 Gbps, upstream)
8 = USB 3.1 Gen1 (5Gbps, downstre am)
9 = USB 3.1 Gen1 (5Gbps) type C
10 = Security slot for Security Lock
► Select the appropriate data cable for your computer.
Fujitsu 17
To Next Page
Loading...
