EasyManua.ls Logo

Fujitsu B27-9 TE QHD - Your LCD Screen; Target Group

Fujitsu B27-9 TE QHD
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
TFT display (Thin Film Transistor; active matrix)
minimal space requirement
s thanks to slim casing
optimum ergonomic cha racteristics (totally distortion-free, excellent picture
denition and colour purity right into the co rners)
high degree of brightne
ss and good contrast
High resolution (2560 x 1440)
presentation of up to 1
6.7 million colours (in conjunction with an appropriate display adapter)
Automatic scanning of horizontal frequencies from 30 to 100 kHz and refresh rates
(vertical frequencies) from 48 to 76 Hz (absolutely icker-free)
Digital screen contr
oller with microp rocessor for storing 28 different display modes
freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
convenient opera
tion via integrated OSD (On-Screen-display) menu
VESA-DDC compatibility
VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface)
Mounting device
for swivel arm or a similar accessory
Plug&Play capability
Digital video
inputs (DVI, HDMI and DisplayPort) with HD CP
power management for reducing power consumption w hen the computer is not in use
Compliance w
ith the recommendations according to the latest TC O requirements
the monitor fullls all GS ("Geprüfte Sicherheit", Certied Security) requirements.
This o perat
ing m anual contains important information you require to start up and run your LCD monitor.
A digital gr
aphics card w ith a DVI-D interface or a video signal source with HDM I or DP
interface
is required to control the LCD monitor. The screen processes the d ata supplied
to it by the
graphics card. The graphics card or the corresponding driver software is
responsi
ble for setting the m odes (resolution and refresh rate).
When putt
ing the monitor into operation for the rst time , the screen display should be
optimal
ly adapted to the display adapter used and a d justed in acco rdance w ith y our
needs (s
ee chapter "
Changing the monitor settings", Page 20).
Target group
You don’t need to be an " expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the event of any problems, please contact your sales ofce or our Service Desk.
Fujitsu 5

Table of Contents

Related product manuals