Getting started
Removing monitor base
Before you can use a swivel arm or a similar acce ssory, you must remove the monitor base.
The display surface is susceptible to scratching!
1
2
3
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the m onitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Release the base stand by pressing the
slider down (1). Move it in the direction of the
arrow (2) and lift the base s tand upwards (3).
You can now mount a swivel arm or a
similar accessory in accordance with
VESA FDMI using a hole spacing of
100 mm (VESA M IS‑D, 1 00, C).
For instructions on how to moun t the swivel arm or a similar accessory, please
see the documentation for t he swivel arm or similar accessory.
Fujitsu 15
To Next Page
Loading...
