Fujitsu B27T-7 User Manual

Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you ch ange the brightness of the b ackground lighting.
Contrast
Set the contrast of th e display
With this function you modify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you mod ify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
sensor.
If the contrast is set too high, bright surfaces can no l onger be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightn ess will not be achieved.
Adjusting the picture size and position
These settings are only possible if the PC is connected analog via VGA.
Call the Image
adjust setting window
Phase
Eliminate picture disturbance
With this func tion you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchro
nisation
With this f
unction you ad just the picture wid th to eliminate vertical pict ure
disturban
ces.
H-Positi
on
Adjust th
e horizontal position
With this
function you move the picture to the left or to th e right.
V-Posit
ion
Adjust t
he vertical position
With th
is function you move the picture up or down.
Expans
ion
Adjus
t the picture size
Full s
creen = selection of full screen mode
Keep
aspect = maximum picture size without distortion
Fujitsu 25

Fujitsu B27T-7 Specifications

General

Brand	Fujitsu
Model	B27T-7
Category	Monitor
Language	English