24 U41858-J-Z126-2-76
– SE300 in its basic configuration with one SU300 (type SU x86)
The SU300 provides BS2000 performance solely on the basis of x86 technology.
16 models are available with 1 to 16 XEON processor cores. In terms of processor
performance, configurability and scalability of the monoprocessor performance, the
SU300 models range below the SU700/SU500 models.
SE servers can optionally be equipped with additional SU300s. For example, an
SE500/700 can be equipped with up to two SU300s, and an SE300 with up to three
SU300s.
● Net Unit, for SU /390 with HNC
Gigabit Ethernet Switches are integrated into the rack for internal communication. In the
case of SE700 and SE500 the Net Unit is by default redundant in design. In the case of
SE300, redundancy of the Net Unit is optional. In the case of SE700 and SE500 an
HNC provides the LAN connections for the SU /390.
● Rack console and KVM switch
● Application Unit (AU)
Optionally up to 20 AUs can be operated on the SE server for customer applications.
An x86-based AU permits operation under Linux, Windows or VMware.
● Peripherals (storage)
● Optional hardware components:
– Up to two ETERNUS JX40 disk storage systems can optionally be integrated into
the rack to back up the user data and connected to an SU x86 or AU. Further disk
storage systems (e.g. ETERNUS DX) can optionally be connected via Fibre
Channel.
– ETERNUS LT40 S2 tape libraries with LTO drives can optionally be integrated into
the rack to back up the user data and connected to an SU x86 or AU. Further tape
libraries (e.g. ETERNUS CS HE and Scalar i500, i6000, 10000) can optionally be
connected via Fibre Channel.
All components of the SE server are integrated into a joint rack (depending on the configu-
ration, further racks are optionally possible). Information on the current hardware configu-
ration of your SE server is displayed by the SE Manager in the Hardware → HW Inventory
menu (see the "Operation and Administration" manual [5]).
Detailed information on the installation data, in particular on the dimensions and weights, is
provided in the data sheet "FUJITSU Server BS2000 SE Series".
See the product site for the relevant server at http://www.fujitsu.com/uk:
Ê Go to Products → Servers → BS2000 → FUJITSU Server BS2000 and select SE700,
SE500 or SE300.
To Next Page
Loading...
Need help?
General