To Next Page

To Previous Page

U41858-J-Z126-2-76 33

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

12. April 2017 Stand 18:58.59 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k05

5 Controls

5.1 Rack console

The rack console contains the following in a compact 19'' slide-in housing (1 HU):

● A fold-out 17'' TFT color LCD monitor with a control panel and screen menu

● A keyboard with US/international assignment with an integrated number pad

● A touchpad with a scroll bar

● Left and right mouse buttons

Monitor, keyboard and touchpad are protected in the slide-in module.

The rack console serves as the local console:

● Entries from the rack console are normally transferred to the Management Unit.

Outputs to the rack console normally come from the Management Unit, depending on

the setting of the console switch, see section “Console switch” on page 43.

● After you have logged in on the local console, you can call the SE Manager via the local

desktop's browser.

Safety instructions

● Pull the rack console slowly toward you until the slide rails lock. If the slide rails are not

locked, the rack console can move unexpectedly. Be careful not to catch your fingers

when you pull or push on the slide module or when you open or close the LCD, etc.

● Do not apply any strong force to the rack console when it is pulled out or when the

monitor is opened and being used.

● Do not press strongly on the monitor's screen, scratch it with sharp objects, or bring

magnetic objects near it. Doing so can damage the monitor.

● Note that the corners of the open device can be dangerous if bumped into. Always be

careful when the device is open.

● We recommend that you store the rack console in the rack when not in use.

Fujitsu BS2000 Basic Operating Manual

Other manuals for Fujitsu BS2000