To Next Page

To Previous Page

Switching the server on and off Switching the SE700 / SE500 on and off

U41858-J-Z126-2-76 81

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

19. April 2017 Stand 15:41.41 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k08

Alternatively you can switch the Server Unit off by pressing the STAND-BY button on the

server's control panel (see page 44) or via the SVP console (menu item POWER STAND-

BY in AUXILIARY FRAME: POWER STAND-BY/IMPL). The BS2000 system should

already have been shut down.

i The control panel and SVP frames of the Server Unit are described in the "Server

Unit /390" Operating Manual [2].

3. Switch off the Server Units x86

Ê As the administrator, BS2000 administrator or a privileged operator, switch off the

Server Unit using the SE Manager (menu Hardware →

Units[ → <se server>] (SE<model>), Units tab, Switch off symbol), see the “Operation and

Administration” manual [5].

When the Server Unit is switched off, the BS2000 system is shut down properly taking

into account the remaining runtime specified.

Before the Server Unit is switched off, the power-on indicator lights up green, and after

it has been switched off, it lights up orange. Check this before continuing.

i The controls and indicators of the Server Unit are described in the "Server Unit

x86" Operating Manual [3].

Further Server Units x86 are switched off in the same way.

4. Switch off the MU

Ê Switch off the MU using the SE Manager (menu Hardware →

Units[ → <se server>] (SE<model>), Units tab, Switch off symbol), see the “Operation and

Administration” manual [5]

Before the MU is switched off, the power-on indicator lights up green, and after it has

been switched off, it lights up orange (item 11 in figure 10 on page 50). Check this

before continuing.

Redundant MUs are switched off in the same way.

5. Switch off the optional hardware components

Ê Switch off the ETERNUS LT40 S2 tape library using the On/Off switch on the front (see

the "Additive Components" Operating Manual [4]).

Ê Switch off any other connected hardware components.

Fujitsu BS2000 Basic Operating Manual

Other manuals for Fujitsu BS2000