Fujitsu D2616 - Features

Modular RAID Controllers 55
Modular RAID 6Gb/s (SAS2.0)
4.4.1 Features
● Industry-proven MegaRAID
®
data protection
● Flexibility for both SAS 2.0 and SATA II / SATA III
● Advanced management and configuration suites
● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
● Optional RAID controller FBU (Flash Backup Unit)
● Offers advanced MegaRAID functionality to integrated LSI SAS
● 3.3 V / 12 V PCIe add-in card
● 8-lane 5.0 / 8.0 Gbit PCIe host bus
● 8 SAS/SATA ports
● Each SAS/SATA port supports SSP, SMP and STP
● Support for the following STP features:
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
● Support of the following SSP features:
– Wide port functionality (2 or 4 Phys from a single quad port,
or
or 8 Phys over two quad ports )
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
● 2 Mini SAS 4i SFF-8087 connectors
● Hot-plug drives
● SGPIO interfaces for signaling of SAS/SATA ports
● Hardware XOR for RAID parity calculations
● 72-bit wide 1 GB of 1333MHz DDR3 SDRAM (with ECC)