Need help?Do you have a question about the Fujitsu E22T-7 LED and is the answer not in the manual?
Identifies the intended audience for this operating manual.
Provides details on resolution, refresh rates, and screen technology.
Explains symbols, fonts, and cross-references used throughout the manual.
Covers essential safety guidelines for device operation and environment.
Guidelines for using and replacing the monitor's power cable correctly.
Instructions for safely moving the monitor to prevent damage.
Procedures for safely cleaning the display surface and casing.
Details the monitor's compliance with EU directives.
Information on environmentally responsible disposal methods.
Steps for unpacking and verifying monitor package contents and condition.
Guidance on proper monitor placement and ensuring sufficient ventilation.
Recommendations for configuring an ergonomic video workstation.
Instructions for attaching the monitor's baseplate securely.
How to tilt the monitor for the optimal viewing angle.
Steps for detaching the baseplate for safe transportation.
Instructions for removing the cover to access VESA mounting points.
Step-by-step guide for connecting cables to the monitor and PC.
How to switch the monitor on and off, and LED indicator status.
Information on the monitor's energy-saving modes and power consumption.
Using physical buttons for direct settings adjustment without OSD.
Procedure for choosing the desired language for the On-Screen Display.
Initiating automatic adjustment for optimal picture quality and position.
How to switch between VGA, DVI, and HDMI input sources.
Prevents accidental changes to monitor settings via OSD or buttons.
How to activate or deactivate the ECO power-saving mode.
Navigating the On-Screen Display menu to adjust various monitor parameters.
Detailed explanation of available functions within the OSD menu.
How to modify the display's brightness and contrast levels.
Fine-tuning image dimensions and placement on the screen.
Adjusting volume for integrated loudspeakers and muting function.
Adjusting screen colours and selecting colour temperature presets.
Customizing OSD language and setting the display duration.
Accessing and configuring advanced monitor functions like input selection and DDC-CI.
Shows monitor model, serial number, resolution, and operational status.
Provides guidance on suitable colour combinations for text and background.
Explains pixel and subpixel definitions and defect standards (ISO 9241-307).
Details the physical size, weight, and display specifications.
Covers power supply requirements and consumption levels.
Specifies the required operating and storage environmental parameters.
Explains the VESA-DDC communication interface for optimal operation.
Lists factory-set picture positions and sizes for various modes.
Lists common horizontal frequencies, refresh rates, and resolutions.
Details the pin configuration and meaning for the VGA connector.
Details the pin configuration and meaning for the DVI-D connector.
Details the pin configuration and meaning for the HDMI connector.
To Next Page
General