Operation
1
2
The webcam module can be activated and deactivat ed via the sliding mechanism (1) or
adjusted upwards or downwards by tilting the viewing angle (2).
The webcam can be dereg istere d from the system either mechanically via
the sliding mechanism or via the OSD menu.
The presence sensor can be deactivated via the O SD me nu.
The digital microphone can only be deactivated via the operating system.
The sliding mechanism only influences the webcam function.
Depending on the so ftware used, you can use this webcam mod ule to take pictures,
record video clips or take part in web chats.
The webcam module has a separate L ED indicator. T he LED indicator lights
up when the webcam is switched on.
• The picture quality depends on the lighting conditions and the softw are being used.
• You can
only operate the webcam module with a particular application (e.g. an Internet
teleph
ony program or a video conferencing program which supports a webcam).
• When using the webcam module, the system support (e.g. the table) should not
wobble or vibrate, as this affects the picture quality.
•Thewe
bcam module automatically a djusts itself to the current light level. For this reason
the LC
D display may flicker while the light level is adjusted.
44 Fujitsu
To Next Page
Loading...
