Fujitsu Eternus DX500 S3 - Page 749

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
749
A.1.8.2 Export/Delete Log
For details about this function, refer to "1.9.3 Export/Delete Log" (page 150).
For the factory default settings for this function, refer to "Appendix B Export/Delete Log" (page 983)
.
● Option
• Time Range Specified
• Start time
• End Time
• Include I/O Module log
• Log File Size
• Delete of Customer Information
Description To specify a time range for exporting logs, select "Yes". Select "No" if not specifying. To
export logs from the last 24 hours, select the "Last 24 hours".
Input condition/
Display contents
• Yes
• No
• Last 24 hours
Description When a time range is to be specified, specify the date and time to start exporting logs.
Input condition/
Display contents
YYYY-MM-DD hh:mm:ss (YYYY: Year, MM: Month (01 - 12), DD: Date (01 - 31), hh: Hour
(00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
Description When a time range is to be specified, specify the date and time to finish exporting logs.
Input condition/
Display contents
YYYY-MM-DD hh:mm:ss (YYYY: Year, MM: Month (01 - 12), DD: Date (01 - 31), hh: Hour
(00 - 23), mm: Minute (00 - 59), ss: Second (00 - 59))
Description When exporting the I/O module logs, select "Yes". When not exporting, select "No".
Input condition/
Display contents
• Yes
• No
Description Select the log file size (segment size) when saving the exported log.
Input condition/
Display contents
• Non-segmentation
• 4.27 MB
• 1.44MB (Floppy Disk)
• 640KB (E-Mail)
Description When deleting the customer information (information to identify the customer such as;
user name, box ID, and IP address) from the exported log, select "Yes". When not
deleting, select "No".
Input condition/
Display contents
• Yes
• No