Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
136
The procedures to create SSL server key and the self-signed SSL certificate are as follows:
1 Click [Create SSL Certificate] in [Action].
2 Specify the parameters.
The main setting items are as follows.
● Create Self-signed SSL Certificate Setting
• Key Length
• Common Name
• Subject Alt Name
3 Click the [Create] button.
A confirmation screen appears.
4 Click the [OK] button.
Creation of the self-signed SSL certificate starts.
If an error screen appears under the following conditions, check the parameter settings.
• When items do not satisfy the input conditions
• When all of the required items are not input
To Next Page
Loading...
