Fujitsu ETERNUS DX8700 S3 - A.6 Thin Provisioning Management

Appendix A Parameter List
A.6 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
921
A.6 Thin Provisioning Management
This section provides information on the parameters of the following actions for Thin Provisioning
management.
• Set Thin Provisioning
• Create Thin Provisioning Pool
• Rename Thin Provisioning Pool
• Expand Thin Provisioning Pool
• Modify Threshold Thin Provisioning Pool
• Modify Cache Parameters (Thin Provisioning Pool)
• Assign Eco-mode Schedule (Thin Provisioning Pool)
A.6.1 Set Thin Provisioning
For details about this function, refer to "6.1 Set Thin Provisioning" (page 557).
For the factory default settings for this function, refer to "Appendix B Set Thin Provisioning" (page 1006)
.
● Thin Provisioning Settings
• Thin Provisioning
Description Select whether to "Enable" or "Disable" the Thin Provisioning function.
Input condition/
Display contents
• Enable
• Disable