Fujitsu ETERNUS DX8700 S3 - Rename Volume

Chapter 3 Volume Management
3.3 Rename Volume
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
274
3.3 Rename Volume
This function changes the volume name.
For details on the parameters for this function, refer to "A.3.2 Rename Volume" (page 795)
.
For the factory default settings for this function, refer to "Appendix B Rename Volume" (page 989)
.
The procedure to rename a volume is as follows:
Procedure
1 Select the volume to be renamed (multiple selections can be made) and click [Rename] in
[Action].
2 Input the new volume "Name" and the "Start of Suffix" (only when multiple volumes are
selected).
The main setting items are as follows.
● Rename Setting
• Name
• Start of Suffix
For the ETERNUS DX8700 S3/DX8900 S3, up to 1024 volumes can be renamed at a time. Note that this limita-
tion does not apply to other models.
The [Rename] button cannot be clicked under the following conditions:
• The usage of the selected volume is "System"
• For the ETERNUS DX8700 S3/DX8900 S3, the number of selected volumes exceeds 1024