Fujitsu ETERNUS DX8700 S3 - Clear Cache

Chapter 1 System Management
1.5 Utility Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
71
2 Click the [Stop] button.
 A confirmation screen appears.
3 Click the [OK] button.
 Acquisition of performance information stops.
4 Click the [Done] button to return to the [Utility] screen.
End of procedure
1.5.5 Clear Cache
This function clears all of the data on the CM cache memory, data on the EXC, and data on the EXCP
(hereinafter collectively referred to as "cache data").
This function is used when monitoring the system performance.
Cache data to be cleared
• Read data on the CM, EXC (*1), and EXCP (*1)
• Multiple cache data to be cleared can be selected from "CM", "EXC (*1)", and "EXCP" (*1).
*1: Among the "EXC" and "EXCP", only the enabled cache can be the target for clearing.