Fujitsu ETERNUS DX8700 S3 - Force Delete Snap Data Pool Volume

Chapter 3 Volume Management
3.8 SDV/SDPV Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
299
3 Click the [Done] button to return to the [Volume] screen.
End of procedure
3.8.2 Force Delete Snap Data Pool Volume
A Snap Data Pool Volume (SDPV) is a logical volume that is created in the SDP.
This function forcibly deletes an SDPV regardless of whether it being used or not to reduce SDP capacity.
The procedure to forcibly delete an SDPV is as follows:
Procedure
1 Select the SDPV to be deleted (multiple selections can be made) and click [Force Delete
SDPV] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Deletion of SDPV starts.
3 Click the [Done] button to return to the [Volume] screen.
End of procedure
• Registering a license for the Advanced Copy function or the Unified Storage environment is required to
use this function.
• If the currently used SDPV is deleted, an error occurs for the SnapOPC session or the SnapOPC+ session
that is using the relevant SDPV.
An SDPV that is in "Reserved Deletion" status can be deleted.