Fujitsu ETERNUS DX8700 S3 - Export Configuration

Chapter 1 System Management
1.5 Utility Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
68
1.5.3 Export Configuration
This function exports the configuration data from the ETERNUS DX as a configuration file and stores it in the
local PC, or other medium.
The procedure to export configuration definition file is as follows:
Procedure
1 Click [Export Configuration] in [Action].
2 Click the [Download] button to save the setup information.
 A confirmation screen appears.
3 Click the [OK] button.
The extension of the file to be saved must be ".cfg".
The default file name is "Conf_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss.cfg".
(YYYY-MM-DD_hh-mm-ss: the date and time when the download screen (Step 2
) is displayed.)
 The configuration information is exported.
• The obtained configuration files may be required to restore the ETERNUS DX if an error occurs. When
altering the ETERNUS DX configuration information, it is recommended to backup the configuration file
before making any changes.
• When exporting of the configuration information has been completed, save the file immediately. The
extension of the file to be saved must be ". cfg".
• Applying configuration information must be performed by a maintenance engineer with a user account
that has the "Maintenance Operation" policy.