Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
175
2 Specify the parameters.
The main setting items are as follows.
● Key Group Setting
• Name
• Storage System Group Name
• Security Level
• Recovery Mode
• Key Valid Period
• Key Server
3 Click the [Modify] button.
A confirmation screen appears.
4 Click the [OK] button.
Changing of the key group settings starts.
5 Click the [Done] button to return to the [Key Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• When the "Name" is not entered
• When the "Storage System Group Name" is not entered
• When each parameter fails to satisfy the input conditions
• When the same server ID is specified for both the master and slave servers
• When "None" is selected for both of the servers (master and slave) while RAID groups are
registered in the key group
To Next Page
Loading...
