Chapter 4 Connectivity Management
4.5 Host Response Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
477
3 Click the [Modify] button.
A confirmation screen appears.
4 Click the [OK] button.
Modification of the host response starts.
5 Click the [Done] button to return to the [Host Response] screen.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" matches with an existing host response name
• An unrecognizable LUN exists
To Next Page
Loading...
