Chapter 1 System Management
1.6 Eco-mode Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
83
6 After editing all the events, click the [Set] button.
A confirmation screen appears.
7 Click the [OK] button.
Modification of the Eco-mode schedule starts.
8 Click the [Done] button to return to the [Eco-mode] screen.
If an error screen appears under the following conditions, check the parameter settings.
• "Schedule Name" has not been entered
• "Schedule Name" matches with an existing schedule name
To Next Page
Loading...
