Fujitsu ETERNUS Guide

Server Connection Guide (iSCSI) for Oracle Solaris
15
Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Chapter 7 Installing the iSCSI Software Initiator
and Setting Up the Server
7.1 Installing the iSCSI Software Initiator
Since iSCSI Software Initiator is provided with the OS, installation is not required.
7.2 Setting Up the Server
iSCSI connection settings depend on the CHAP authentication method. Perform the settings to
match the CHAP authentication to be used.
CHAP authentication method Required settings
None
"7.2.1 Setting Up the Command Queue Depth" (page 16)
"7.2.2 iSCSI Basic Settings" (page 17)
Unidirectional
CHAP authentication
"7.2.1 Setting Up the Command Queue Depth" (page 16)
"7.2.2 iSCSI Basic Settings" (page 17)
"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)
Bidirectional
CHAP authentication
"7.2.1 Setting Up the Command Queue Depth" (page 16)
"7.2.2 iSCSI Basic Settings" (page 17)
"7.2.3 Server Settings when CHAP Authentication is Used" (page 19)
"7.2.4 Server Settings when Bidirectional CHAP Authentication is
Used" (page 21)

Fujitsu ETERNUS Specifications

General

Category	Storage
Brand	Fujitsu
Product Line	ETERNUS
Capacity	Varies by model
Interface	SAS, iSCSI, Fibre Channel
Management Software	ETERNUS SF