Fujitsu ETERNUS - Table of Contents

Server Connection Guide (iSCSI) for Oracle Solaris
6
Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Contents
Chapter 1 Workflow ...................................................................................7
Chapter 2 Checking the Server Environment..........................................9
2.1 Hardware ............................................................................................................ 9
2.2 Basic Software ................................................................................................... 9
2.3 Network Interface Card ...................................................................................... 9
2.4 Multipath Configuration ...................................................................................... 9
Chapter 3 Notes .......................................................................................10
3.1 LAN Environment Notes ................................................................................... 10
3.2 Server Startup and Power Supply Control Notes ............................................. 11
Chapter 4 Checking the Server Information..........................................12
Chapter 5 Installing and Setting Up ETERNUSmgr ..............................13
Chapter 6 Setting Up the ETERNUS Disk Storage Systems................14
Chapter 7 Installing the iSCSI Software Initiator
and Setting Up the Server .....................................................15
7.1 Installing the iSCSI Software Initiator ............................................................... 15
7.2 Setting Up the Server ....................................................................................... 15
7.2.1 Setting Up the Command Queue Depth .................................................................................... 16
7.2.2 iSCSI Basic Settings .................................................................................................................. 17
7.2.3 Server Settings when CHAP Authentication is Used ................................................................. 19
7.2.4 Server Settings when Bidirectional CHAP Authentication is Used ............................................ 21
Chapter 8 Checking Connections ..........................................................23
8.1 Turning on the Devices .................................................................................... 23
8.2 Logical Unit Recognition .................................................................................. 23
Chapter 9 Setting Up the Multipath Configuration ...............................24
9.1 Enabling MPxIO ............................................................................................... 24
9.2 Reconfiguring and Restarting the Server ......................................................... 24
Chapter 10 Creating a File System...........................................................26