To Next Page

To Previous Page

Server Connection Guide (iSCSI) for Oracle Solaris

P3AM-4182-03ENZ0

Preface

This document briefly explains the operations that need to be performed by the user in order to

connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or

ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a

server running Solaris OS via an iSCSI interface.

This document should be used in conjunction with any other applicable user manuals, such as

those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or

ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,

OS used, LAN cards, drivers, etc.

Note that this manual refers the following documents:

• Server Support Matrix

• ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS2000

• ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage

System Settings for ETERNUS4000, ETERNUS8000

• ETERNUSmgr Install Guide

• ETERNUSmgr User Guide

Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000 mod-

els 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100, and

2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.

Third Edition

December 2010

The Contents and Structure of this Manual

This document is composed of the following ten chapters.

• Chapter 1 Workflow

This describes how to connect the ETERNUS Disk storage system to a server.

• Chapter 2 Checking the Server Environment

This describes which servers can be connected to ETERNUS Disk storage systems.

• Chapter 3 Notes

This describes issues that should be noted when connecting the ETERNUS Disk storage

systems and server.

Fujitsu ETERNUS Guide

Other manuals for Fujitsu ETERNUS