Fujitsu fi-5220C Instruction Manual

8
Versitec 1- 888 - 722 - 6548 www.versitec.com
Step Two: Cleaning the Automatic Document Feeder
*For the Fi-4120c & Fi-4220c
1 Clear the Automatic Document Feeder (ADF) of any documents.
2 Push the ADF cover release button and open the ADF cover to
the front. Be careful that the open cover does not close on your
hands during this process.
3 Using a soft dry cloth or a cloth moistened with F1 Cleaner,
clean the following items:
Pad Assembly: Gently wipe the pad assembly in a downward
motion. Be careful not to bend the metal pick springs.
Pick Roller Unit: Gently clean this roller. If dust or debris
becomes attached to the roller it will degrade
feed performance.
Feed Roller: Gently clean these four rollers. Dust, particles, or
toner residue on the rollers may affect paper feeding.
*** You can make the rollers rotate to facilitate cleaning the entire
roller surface by first:
A) Open the ADF cover while the operator panel reads anything
except “P” or “0”.
B) Then press and hold down the “Send” and “Scan” buttons.

Fujitsu fi-5220C Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	2 sec/page
Scanner type	Flatbed & ADF scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	SCSI, USB 2.0
Bundled software	-FJ TWAIN driver. -Scandall. -Adobe Acrobat. -ISIS Driver. -QuickScan (demo). -Soft IPC (demo). -VRS 4.1 Basic.
Dimensions (WxDxH)	302 x 569 x 229 mm
Power requirements	100-240 VAC
Power consumption (standby)	6 W
Power consumption (typical)	34 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	8400 g