Fujitsu fi-5220C Instruction Manual

2
Versitec 1- 888 - 722 - 6548 www.versitec.com
I. fi-4120C/fi-4220C Parts Replacement
Fire or electrical shock may occur when replacing
any of the equipment’s consumables.
Disconnect the AC adapter power plug
from the outlet.
Parts and Consumable Replacement Cycles:
Consumable Item Replacement Cycle (standard)
Pad Assembly Every 50,000 sheets or annually
Pick Roller Every 100,000 sheets or annually
NOTE:
The replacement cycle is estimated for letter size, high quality paper
(20lb, 65 kg/ ream, 75/m) and will differ depending on the type of
paper used.
NOTE:
The pick and roller counter can be reset on the host PC depending on
the operating system you are using. Check your Fujitsu scanner
operator’s guide for instructions.
Step One: Replacing the Pad Assembly
1 Clear the Automatic Document Feeder (ADF) of any documents.

Fujitsu fi-5220C Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	2 sec/page
Scanner type	Flatbed & ADF scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	SCSI, USB 2.0
Bundled software	-FJ TWAIN driver. -Scandall. -Adobe Acrobat. -ISIS Driver. -QuickScan (demo). -Soft IPC (demo). -VRS 4.1 Basic.
Dimensions (WxDxH)	302 x 569 x 229 mm
Power requirements	100-240 VAC
Power consumption (standby)	6 W
Power consumption (typical)	34 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	8400 g