Fujitsu fi-5220C User Manual

5.3ReplacingthePickRoller(4)
fi-5120C / fi-5220C Image Scanner Operator Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP

5.3ReplacingthePickRoller(4)


1 2 3
4
5
10. Reset the Pick Roller Counter.
For Windows 98 / Windows Me / Windows 2000 / Window XP
When turning on the power, check that the scanner is connected to your PC.
Open the [Scanners and Cameras] from the [Control Panel] of your PC.
Open the properties dialogbox of fi-5120Cdj or fi-5220Cdj from the [Scanners and Cameras].
The properties dialogbox of fi-5120C or fi-5220C appears.
Click the "Device Set" tab.
The following screen is displayed.
After clicking the [Clear] button beside "Pick Roller" in "Page Counter", click the [OK]
button.
The following screen is displayed.
Click the [OK] button. This returns the pick counter to "0".
1 2 3
4
5
AllRightsReservedCopyright2006©PFULIMITED
file://///Hd-htgle21/Manual/fi-5120C5220C-lynx2/OG/R03/contents/EN/05/c050304.htm2006/08/2916:01:23

Fujitsu fi-5220C Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	2 sec/page
Scanner type	Flatbed & ADF scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	SCSI, USB 2.0
Bundled software	-FJ TWAIN driver. -Scandall. -Adobe Acrobat. -ISIS Driver. -QuickScan (demo). -Soft IPC (demo). -VRS 4.1 Basic.
Dimensions (WxDxH)	302 x 569 x 229 mm
Power requirements	100-240 VAC
Power consumption (standby)	6 W
Power consumption (typical)	34 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	8400 g